Sunday, June 29, 2014

Curacao Break

curacaoIMG_5555
We’ve been in Curacao for two weeks now. About time I posted a pic. This is the entrance to Willemstad Harbor. We are passing through the open pontoon bridge that separates the two sides of the colorful city. We had to sit outside in the rolly swell for about a half hour waiting for a large tanker to exit the harbor. When small boats like ours come through they just move the pontoon bridge about 20 feet open. For the tankers it has to be brought all the way to the far side. This is a major refining port, where oil from Maracaibo in Venezuela flows in and out and the gas flares of refineries shine at night.
Bonaire is the easy, cruisers island to hang at. Curacao is more the cruisers place to do work on the boat and for hurricane season storage. It is located south of 12*30 N – which is considered out of the hurricane belt. Although there has been hurricane related damage here over the years, it is typically due to heavy rains and large swells. This will be the first time in 4 years of cruising that we put the boat on the hard for storage. We’ll be gone for a little over two months. A month up in Washington to make sure that Meghan goes through with her wedding plans and Tyler behaves. A month down in Southern Cal visiting Chris’ relatives and then a quick stop in Florida to see my Dad. 
curacaoDSCN1057 The big tractor cometh.
We got hauled at Curacao Marine. This yard has a good reputation for service and security in their storage yard. Two large Doberman Pinchers work the storage yard. Yachtie relatives of junk-yard dogs.
curacaoDSCN1062 Georgia getting her bottom cleaned off
curacaoDSCN1077
   While still on the trailer, I dropped the rudder. When we are going downwind in heavy seas there’s always a little squeak that you can hear from the upper end of the rudder post. Since rudders are handy things to have on a boat while at sea, I wanted to inspect the upper bearing. Here I’m re-installing it. This time with 3M 4000 white bedding. Prior to this it only had 6 bolts securing it in that would continually work themselves loose. We’ll see on our passage out of Curacao if the squeak has quieted down.
Paul

2 comments:

  1. email us when you get here in Washington. We're still trying to sell our house and may still be here. SV Saben

    ReplyDelete
  2. Been reading your blog for awhile. We just got back from a year in Mexico with our three kids.
    On the way down, our boat developed a squeak in the steering also. Turns out it was my steering cables. They were too tight. You might have already looked into that but I never thought to look. Almost pulled the boat to replace the bearing. Well, we did that in Mazatlan but it was unrelated to the squeaking.
    Best,
    Marcus

    ReplyDelete